Phoenix Contact TRIO POWER Second Generation Power Supplies
Phoenix Contact TRIO-PS-2G DIN-rail power supplies with push-in connections and dynamic boost. This selection covers 24 V DC single- and three-phase models and 48 V DC single-phase models, including the compact 3 A C2LPS unit.
View productsTRIO-PS-2G power supplies
Choose the mains input and DC output first, then check continuous load, short peaks, wiring and cabinet space.
Showing 1–10 of 10

Power supplies and circuit protection
Phoenix Contact 2903147 TRIO-PS-2G/1AC/24DC/3/C2LPS Power Supply
2903147
New Original
$108.20

Power supplies and circuit protection
Phoenix Contact 2903148 TRIO-PS-2G/1AC/24DC/5 Power Supply
2903148
New Original
$133.31

Power supplies and circuit protection
Phoenix Contact 2903149 TRIO-PS-2G/1AC/24DC/10 Power Supply
2903149
New Original
$251.21

Power supplies and circuit protection
Phoenix Contact 2903151 TRIO-PS-2G/1AC/24DC/20 Power Supply
2903151
New Original
$340.41

Power supplies and circuit protection
Phoenix Contact 2903153 TRIO-PS-2G/3AC/24DC/5 Power Supply
2903153
New Original
$205.47

Power supplies and circuit protection
Phoenix Contact 2903154 TRIO-PS-2G/3AC/24DC/10 Power Supply
2903154
New Original
$181.16

Power supplies and circuit protection
Phoenix Contact 2903155 TRIO-PS-2G/3AC/24DC/20 Power Supply
2903155
New Original
$597.52

Power supplies and circuit protection
Phoenix Contact 2903156 TRIO-PS-2G/3AC/24DC/40 Power Supply
2903156
New Original
$515.41

Power supplies and circuit protection
Phoenix Contact 2903159 TRIO-PS-2G/1AC/48DC/5 Power Supply
2903159
New Original
$244.14

Power supplies and circuit protection
Phoenix Contact 2903160 TRIO-PS-2G/1AC/48DC/10 Power Supply
2903160
New Original
$368.94
Select the input and output combination
The first ten item numbers span three practical cabinet supply groups.
24 V DC, single-phase input
3 A C2LPS, 5 A, 10 A and 20 A models accept nominal 100–240 V AC input. The 3 A version has a one-second boost; larger selected models provide five seconds.
24 V DC, three-phase input
5 A, 10 A, 20 A and 40 A models use nominal 3 × 400–500 V AC. Their housings and output terminals scale with current; input variants are not interchangeable with 1AC units.
48 V DC, single-phase input
5 A and 10 A units provide 240 W and 480 W respectively. Their 36–55 V adjustment range is different from the 24 V models; above 48 V the constant-power limit applies.
Size the supply around its operating conditions
Generation, rated load and cabinet installation matter more than a shared TRIO POWER name.
- 01
Keep the generation and item number exact
TRIO-PS-2G is the second-generation platform. TRIO3 is a separate generation, and QUINT4 is a different product family. Use the numeric Phoenix Contact item number together with the complete type designation.
- This initial selection excludes UPS, DC/DC, redundancy, IP67 field supplies and B+D marine variants.
- The 3 A C2LPS variant is an NEC Class 2 supply according to UL 1310.
- 02
Continuous current is not boost current
Dynamic boost provides 150% of nominal current for brief load peaks: one second for 2903147 and five seconds for the other selected models. It does not increase the continuous power rating.
- Raising the output voltage above nominal reduces available current at constant power.
- Above +60 °C ambient, reduce output by 2.5% per kelvin.
- 03
Check terminals, clearance and monitoring
Push-in conductor ranges and stripping lengths vary by terminal group and current rating. The floating DC OK contact is a monitoring signal, not a load output.
- Reserve 50 mm vertical clearance; horizontal spacing depends on ambient temperature.
- Check exact housing width and altitude limits on the selected product.
Manufacturer selection resources
Family context and technical selection documents; exact item-number PDFs are included on each product.

