Exact product identification
Your quotation references the complete manufacturer part number to keep the requested product clear.

2903156
TRIO-PS-2G/3AC/24DC/40: three-phase DIN-rail power supply, 24 V DC / 40 A (960 W), with 60 A dynamic boost for 5 seconds. Push-in wiring, DC OK contact and a 110 mm-wide housing.
Warranty coverage and terms are confirmed with your order.
We coordinate the fastest available shipping option for your destination.
Available payment methods are handled through secure payment channels.
Carrier and delivery options are confirmed for your destination before dispatch.
Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Phoenix Contact. Brand names are used for identification and compatibility purposes only. Read disclaimer
Output capacity, input supply, connection details and cabinet installation for TRIO-PS-2G/3AC/24DC/40.
TRIO-PS-2G/3AC/24DC/40 supplies 40 A continuously at 24 V DC (960 W). Its dynamic boost delivers 60 A for 5 seconds for short load peaks; this is not its continuous output rating.
| Parameter / condition | Continuous | Dynamic boost |
|---|---|---|
| Output voltage | 24 V DC | 24 V DC |
| Output current | 40 A | 60 A |
| Output power | 960 W | 1440 W |
| Duration | Continuous within installation ratings | 5 s |
Ratings are at nominal output voltage. Allow for the load profile and temperature limits when sizing continuous demand.
24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)
typ. 92.6 % (400 V AC)
≤ 50 mVPP
yes, for redundancy and increased capacity
yes
The adjustment range does not increase the 960 W continuous rating. Above 24 V, the constant-power operating limit reduces the available current. Size the supply for the load at the actual set voltage, including cable voltage drop and startup demand.
This 3AC version is designed for nominal 3 × 400–500 V AC. Its three-phase operating range is 320–575 V AC. Select this model for its documented three-phase supply configuration.
3 × 400–500 V AC
320–575 V AC, three-phase
50 Hz ... 60 Hz
10 A ... 16 A (Characteristics B, C, D, K)
I (in closed control cabinet)
Provide the documented mains input arrangement; do not select this 3AC unit as a 100–240 V single-phase supply. The input breaker recommendation is for supply protection, not a claim that each DC branch is individually protected.
| Parameter / condition | Rigid conductor | Flexible conductor | Stripping length |
|---|---|---|---|
| Input | 0.2 mm²–4 mm² | 0.2 mm²–2.5 mm² | 10 mm |
| Output | 0.75 mm²–16 mm² | 0.75 mm²–10 mm² | 18 mm |
| Signal | 0.2 mm²–1.5 mm² | 0.2 mm²–1.5 mm² | 8 mm |
Cross-sections and stripping lengths are terminal-group specific. Input, output and signaling terminals do not necessarily accept the same conductors.
Power path and signaling terminals
Original manufacturer block diagram for TRIO-PS-2G/3AC/24DC/40. Terminal markings are preserved.
Green DC OK LED
Floating DC OK contact, terminals 13 and 14
30 V AC/DC, 100 mA
UOUT > 0.9 x UN (UN = 24 V DC)
The floating contact reports the supply output state to the control circuit. It is separate from the 24 V / 40 A load output and is limited to 100 mA switching current. Parallel connection capability does not make the unit a UPS or a redundancy module.
2903156
TRIO-PS-2G/3AC/24DC/40
TRIO POWER second generation, TRIO-PS-2G
110 × 130 × 160 mm
2,601.54 g
Horizontal on NS 35 DIN rail, EN 60715
IP20
Natural convection
−25 to +70 °C
Above +60 °C, derate by 2.5% per kelvin.
−40 to +85 °C
≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)
Allow 50 mm vertical clearance. Horizontal spacing is 0 mm up to 40 °C ambient and 10 mm up to 70 °C. These are installation conditions, not additions to the 110 mm housing width. Keep the unit in a closed control cabinet and leave the ventilation slots unobstructed.
Continuous ambient operation is rated from −25 to +70 °C, with output derating above +60 °C. The manufacturer's typical −40 °C startup test is not a −40 °C continuous operating rating. Altitude derating applies above 2,000 m as described in the data sheet.
Exact item-number data and manufacturer technical resources.
Order the exact product and condition your project requires, with assistance from quotation through delivery.
Your quotation references the complete manufacturer part number to keep the requested product clear.
Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.
Shipping options are prepared around your destination, quantity and requested delivery date.
Access available manufacturer product data, manuals and certificates associated with the order number.