Skip to content
Phoenix Contact TRIO-PS-2G/1AC/24DC/20 gray DIN-rail power supply with push-in terminals

Phoenix Contact 2903151 TRIO-PS-2G/1AC/24DC/20 Power Supply

2903151

TRIO-PS-2G/1AC/24DC/20: single-phase DIN-rail power supply, 24 V DC / 20 A (480 W), with 30 A dynamic boost for 5 seconds. Push-in wiring, DC OK contact and a 68 mm-wide housing.

Availability
In Stock
Available quantity
12 units
Condition
New Original
SKU
2903151
Lifecycle
Active
$340.41
Request a quote
Ask a product question

12 months warranty

Warranty coverage and terms are confirmed with your order.

Fast shipping

We coordinate the fastest available shipping option for your destination.

Secure payment

Available payment methods are handled through secure payment channels.

Worldwide delivery

Carrier and delivery options are confirmed for your destination before dispatch.

Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Phoenix Contact. Brand names are used for identification and compatibility purposes only. Read disclaimer

Technical specifications

Output capacity, input supply, connection details and cabinet installation for TRIO-PS-2G/1AC/24DC/20.

24 V DC for the control cabinet

TRIO-PS-2G/1AC/24DC/20 supplies 20 A continuously at 24 V DC (480 W). Its dynamic boost delivers 30 A for 5 seconds for short load peaks; this is not its continuous output rating.

Continuous output versus dynamic boost

Continuous output versus dynamic boost
Parameter / conditionContinuousDynamic boost
Output voltage24 V DC24 V DC
Output current20 A30 A
Output power480 W720 W
DurationContinuous within installation ratings5 s

Ratings are at nominal output voltage. Allow for the load profile and temperature limits when sizing continuous demand.

Adjustment and output quality

Output adjustment

24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)

Efficiency

typ. 91.4 % (120 V AC)

Residual ripple

< 100 mVPP (with nominal values)

Parallel connection

yes, for redundancy and increased capacity

Series connection

yes

Voltage adjustment is not extra rated power

The adjustment range does not increase the 480 W continuous rating. Above 24 V, the constant-power operating limit reduces the available current. Size the supply for the load at the actual set voltage, including cable voltage drop and startup demand.

Single-phase mains or DC input

This 1AC version accepts nominal 100–240 V AC or 110–250 V DC. It is not a 400 V three-phase input model. Keep the AC supply within the stated 85–264 V range.

Input ratings

Nominal input

100–240 V AC; 110–250 V DC

AC operating range

85–264 V AC

AC frequency

50 Hz ... 60 Hz ±10 %

Recommended input breaker

10 A ... 16 A (Characteristics B, C, D, K)

Protection class

I (in closed control cabinet)

Match the input variant to the cabinet supply

The 1AC and 3AC versions are different ordering variants; a matching DC output does not make their mains inputs interchangeable. The input breaker recommendation is for supply protection, not a claim that each DC branch is individually protected.

Push-in connection data

Push-in connection data
Parameter / conditionRigid conductorFlexible conductorStripping length
Input0.2 mm²–4 mm²0.2 mm²–2.5 mm²10 mm
Output0.2 mm²–10 mm²0.2 mm²–6 mm²15 mm
Signal0.2 mm²–1.5 mm²0.2 mm²–1.5 mm²8 mm

Cross-sections and stripping lengths are terminal-group specific. Input, output and signaling terminals do not necessarily accept the same conductors.

Power path and signaling terminals

Original manufacturer block diagram for TRIO-PS-2G/1AC/24DC/20. Terminal markings are preserved.

Power path and signaling terminals

TRIO-PS-2G/1AC/24DC/20 input, isolated DC output and DC OK contact 13–14 block diagram

Original manufacturer block diagram for TRIO-PS-2G/1AC/24DC/20. Terminal markings are preserved.

Output-status monitoring

Local indication

Green DC OK LED

Remote signal

Floating DC OK contact, terminals 13 and 14

Contact switching limit

30 V AC/DC, 100 mA

DC OK threshold

UOUT > 0.9 x UN (UN = 24 V DC)

Use the contact for monitoring

The floating contact reports the supply output state to the control circuit. It is separate from the 24 V / 20 A load output and is limited to 100 mA switching current. Parallel connection capability does not make the unit a UPS or a redundancy module.

Cabinet and ordering data

Manufacturer item number

2903151

Product designation

TRIO-PS-2G/1AC/24DC/20

Generation

TRIO POWER second generation, TRIO-PS-2G

Dimensions (W × H × D)

68 × 130 × 160 mm

Weight excluding packing

1,321.8 g

Mounting

Horizontal on NS 35 DIN rail, EN 60715

Enclosure rating

IP20

Cooling

Natural convection

Operating ambient temperature

−25 to +70 °C

Above +60 °C, derate by 2.5% per kelvin.

Storage temperature

−40 to +85 °C

Maximum altitude

≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)

Reserve convection space

Allow 50 mm vertical clearance. Horizontal spacing is 0 mm up to 40 °C ambient and 10 mm up to 70 °C. These are installation conditions, not additions to the 68 mm housing width. Keep the unit in a closed control cabinet and leave the ventilation slots unobstructed.

Separate continuous operation from cold startup

Continuous ambient operation is rated from −25 to +70 °C, with output derating above +60 °C. The manufacturer's typical −40 °C startup test is not a −40 °C continuous operating rating. Altitude derating applies above 2,000 m as described in the data sheet.

Sourcing and order support

Order the exact product and condition your project requires, with assistance from quotation through delivery.

Exact product identification

Your quotation references the complete manufacturer part number to keep the requested product clear.

Condition options

Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.

International delivery

Shipping options are prepared around your destination, quantity and requested delivery date.

Documentation support

Access available manufacturer product data, manuals and certificates associated with the order number.