Yaskawa Sigma-7 SGD7S 200 V Analog/Pulse SERVOPACKs
Yaskawa Sigma-7 SGD7S single-axis servo amplifiers with 200 V-class input and analog-voltage/pulse-train references. The initial standard A00A selection spans 50 W–3 kW, with frame-specific input-phase, regeneration and cabinet requirements.
View productsSGD7S 200 V analog/pulse amplifiers
Select the motor/drive combination and reference interface first, then check input phase, regenerative duty and mounting frame.
Showing 1–10 of 10

Drives and motion
Yaskawa SGD7S-120A00A Sigma-7 1.5 kW Analog/Pulse SERVOPACK
SGD7S-120A00A
New Original
$850.00

Drives and motion
Yaskawa SGD7S-180A00A Sigma-7 2 kW Analog/Pulse SERVOPACK
SGD7S-180A00A
New Original
$1,536.00

Drives and motion
Yaskawa SGD7S-1R6A00A Sigma-7 0.2 kW Analog/Pulse SERVOPACK
SGD7S-1R6A00A
New Original
$645.00

Drives and motion
Yaskawa SGD7S-200A00A Sigma-7 3 kW Analog/Pulse SERVOPACK
SGD7S-200A00A
New Original
$1,882.59

Drives and motion
Yaskawa SGD7S-2R8A00A Sigma-7 0.4 kW Analog/Pulse SERVOPACK
SGD7S-2R8A00A
New Original
$407.48

Drives and motion
Yaskawa SGD7S-3R8A00A Sigma-7 0.5 kW Analog/Pulse SERVOPACK
SGD7S-3R8A00A
New Original
$494.00

Drives and motion
Yaskawa SGD7S-5R5A00A Sigma-7 0.75 kW Analog/Pulse SERVOPACK
SGD7S-5R5A00A
New Original
$225.50

Drives and motion
Yaskawa SGD7S-7R6A00A Sigma-7 1 kW Analog/Pulse SERVOPACK
SGD7S-7R6A00A
New Original
$264.60

Drives and motion
Yaskawa SGD7S-R70A00A Sigma-7 0.05 kW Analog/Pulse SERVOPACK
SGD7S-R70A00A
New Original
$298.00

Drives and motion
Yaskawa SGD7S-R90A00A Sigma-7 0.1 kW Analog/Pulse SERVOPACK
SGD7S-R90A00A
New Original
$589.00
Choose capacity with the input configuration
All selected models are single-axis 200 V A00A analog/pulse units, but their power and installation conditions differ.
50–400 W narrow frames
R70, R90, 1R6 and 2R8 use 40 mm-wide frames. These models permit documented single-phase main input with a parameter change and do not contain a built-in regenerative resistor.
500 W–1 kW medium frames
3R8, 5R5 and 7R6 use 70 mm-wide frames with built-in regenerative resistance. Of these three, 5R5 is documented for the single-phase input conversion.
1.5–3 kW standard three-phase models
120A, 180A and 200A use larger standard frames. The 1.5 kW unsuffixed unit is not the single-phase 008 option; 180A/200A are IP10 rather than IP20.
Build a complete servo axis
Capacity alone does not establish compatibility or cabinet suitability.
- 01
Choose the reference interface before ordering
A00A uses analog-voltage/pulse-train references. MECHATROLINK, EtherCAT, PROFINET and command-option types have different model codes.
- This collection does not include SGD7W dual-axis or SGD7C controller-equipped products.
- SigmaWin+ USB commissioning is separate from the machine motion-command interface.
- 02
Use the motor combination and continuous duty
Match the supported motor and encoder with the SERVOPACK voltage, continuous current and instantaneous demand. Do not use instantaneous current as a continuous rating.
- Motor power, encoder, brake and I/O leads are selected separately.
- Only documented smaller models support single-phase conversion; 120A008 is a different order code.
- 03
Account for regenerative energy and heat
Built-in resistor capacity and minimum external resistance vary by frame. Cabinet temperature, altitude and grouped-mounting airflow affect the permissible output.
- The first four frames do not have a built-in regenerative resistor.
- Body dimensions do not include front cable clearance; use the original model-specific drawing.
Manufacturer engineering resources
Selection, wiring, commissioning and CAD resources for the exact analog/pulse platform.

