Skip to content

Schneider Electric Harmony ST6 Basic HMIs

Schneider Electric Harmony ST6 standard Basic operator panels from 4.3 to 15.6 inches. Compare five integrated resistive-touch HMIs by resolution, communications, panel opening and power demand.

View products

Four decisions before selecting a panel

Start with the operator’s layout, then match communications, enclosure and engineering tools.

  1. 01

    Actual diagonal and pixel layout

    Commercial 4/7/10/12/15-inch classes correspond to actual diagonals of 4.3/7/10.1/12.1/15.6 inches.

    • All use 16-million-color TFT LCDs and single-touch resistive input.
    • Higher resolution supports more layout detail; the project must suit the target panel.
  2. 02

    One-port compact model or larger dual-port models

    HMIST6200 has one Ethernet socket and a selectable RS-232C/485 RJ45 COM1. The larger panels have two Ethernet sockets, D-Sub RS-232C COM1 and RJ45 RS-485 COM2.

    • Serial RJ45 and Ethernet RJ45 have different functions.
    • Choose the controller driver and cable pinout with the HMI project.
  3. 03

    Panel opening and installed front protection

    Opening sizes range from 118.5 × 92.5 to 394 × 250 mm. Front protection depends on the gasket and proper enclosure mounting.

    • Rear protection is IP20.
    • Allow connector bends and at least 100 mm service/ventilation clearance.
  4. 04

    Basic HMI project engineering

    Program the standard ST6 panels with EcoStruxure Operator Terminal Expert; transfer project data to the panel before use.

    • STW6 web terminals and STM6 modular panels are excluded from this collection.
    • Hardware ordering does not include a workstation or software license.