Pilz PSENcode Compact RFID Safety Switches
Compact Pilz RFID switches for non-contact guard monitoring. Compare coded and fully coded switch bodies, standalone five-pin connections, series-capable eight-pin interfaces and integral-cable versions. Actuators are selected separately.
View productsCompact PSENcode switch bodies
Choose the coding level and connection that match the guard circuit. Every product below is one switch without its actuator.
Showing 1–10 of 10

Safety control
Pilz 541053 PSEN cs3.1n Safety Switch
541053
New Original
$117.97

Safety control
Pilz 541059 PSEN cs3.1 M12/8-0.15m Safety Switch
541059
New Original
$118.84

Safety control
Pilz 541060 PSEN cs3.1p Safety Switch
541060
New Original
$229.39

Safety control
Pilz 541061 PSEN cs3.1a Safety Switch
541061
New Original
$117.53

Safety control
Pilz 541062 PSEN cs3.1b Safety Switch
541062
New Original
$138.21

Safety control
Pilz 541153 PSEN cs4.1n Safety Switch
541153
New Original
$317.50

Safety control
Pilz 541159 PSEN cs4.1 M12/8-0.15m Safety Switch
541159
New Original
$325.10

Safety control
Pilz 541160 PSEN cs4.1p Safety Switch
541160
New Original
$319.02

Safety control
Pilz 541161 PSEN cs4.1a Safety Switch
541161
New Original
$319.02

Safety control
Pilz 541162 PSEN cs4.1b Safety Switch
541162
New Original
$334.00
Three connection paths for compact guards
Similar housings do not mean identical electrical interfaces. The first batch pairs coded and fully coded versions across these connection choices.
Five-pin M12 — standalone guard
PSEN cs3.1n / cs4.1n provide supply and two OSSD outputs through a five-pin M12 pigtail. There are no series inputs or SDD diagnostic pair. Pin 5 is not connected.
Eight-pin M8 or M12 — series-capable
PSEN cs3.1p / cs4.1p use M8 eight-pin connections. The M12/8-0.15m versions use an eight-pin M12 connector on a short cable. Both provide two safety inputs and SDD support.
Integral 5 m or 10 m cable
The a versions provide 5 m cables and b versions 10 m cables. Both use eight conductors with the same two-channel series-input and diagnostic functions, without a local plug connection.
Select coding, circuit and actuator together
The switch, actuator and safety evaluation perform different jobs. Use the exact numeric product ID for the required switch-only configuration.
- 01
Coded versus fully coded
The cs3.1 models have Low coding level to EN ISO 14119. The cs4.1 fully coded models have High coding level and support a maximum of eight actuator learning procedures.
- Fully coded is not the separately offered uniquely fully coded option.
- A new cs4.1 actuator requires the specified teach-in sequence.
- 02
Standalone versus series inputs
Use the five-pin n model for an individual switch connection. Choose an eight-pin or eight-wire version when two safety inputs are needed for the series circuit.
- The M12 five-pin and M12 eight-pin assignments are different.
- Evaluate both OSSD channels; diagnostic signals are not safety outputs.
- 03
Order the actuator separately
This collection starts with switch bodies, not switch/actuator sets. The standard compact actuator is 541080 for cs3.1 coded models or 541180 for cs4.1 fully coded models.
- With the named standard actuator: Sao 8 mm and Sar 20 mm.
- Other approved actuator shapes have different operating distances.
- 04
Guard monitoring, not guard locking
PSENcode detects a guard’s position without contact. It does not physically hold the guard closed and is not a substitute for a guard-locking device.
- Large, slim, key and cs3.19 multi-position variants are outside this collection.
- Mount switch and actuator in parallel and provide a separate mechanical door stop.
Manufacturer operating manuals
Choose the manual for the coding and connection of the ordered switch. The full eight-wire connection diagram does not apply to the five-pin n models.

