Skip to content
Pilz compact PSENcode safety switch with M12 pigtail connector and two mounting holes

Pilz 541153 PSEN cs4.1n Safety Switch

541153

Fully coded compact RFID guard-monitoring switch with m12 5-pin male connector, 24 V DC and two OSSD outputs. Standalone five-pin version; no series inputs. One switch, actuator ordered separately.

Availability
In Stock
Available quantity
12 units
Condition
New Original
SKU
541153
Lifecycle
Active
$317.50
Request a quote
Ask a product question

12 months warranty

Warranty coverage and terms are confirmed with your order.

Fast shipping

We coordinate the fastest available shipping option for your destination.

Secure payment

Available payment methods are handled through secure payment channels.

Worldwide delivery

Carrier and delivery options are confirmed for your destination before dispatch.

Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Pilz. Brand names are used for identification and compatibility purposes only. Read disclaimer

Technical specifications

Coding, actuator distances, electrical connections and installation data for 541153.

Individually taught RFID guard monitoring

541153 (PSEN cs4.1n) is a compact non-contact safety switch for monitoring a movable guard using an approved RFID actuator. This order supplies one switch body without the actuator. It detects the guard position; it does not provide guard locking or hold a door closed.

Product and coding

Manufacturer part number

541153

Manufacturer designation

PSEN cs4.1n 1switch

Technology

RFID transponder, non-contact

Design to EN ISO 14119

Type 4

Pilz coding

Fully coded

Coding level to EN ISO 14119

High

Connection

M12 5-pin male connector

Package

One switch; actuator not included

Up to eight actuator teach-in procedures

The first approved actuator is learned automatically when introduced into the response range. A replacement actuator requires the documented teach-in sequence; a maximum of eight learning procedures is possible. This fully coded version is not the separately offered uniquely fully coded variant.

Distances with PSEN cs4.1 actuator 541180

Assured operating distance, Sao

8 mm

Typical operating distance, So

11 mm

Assured release distance, Sar

20 mm

Typical release distance, Sr

14 mm

Actuating direction

One

Reference arrangement

Switch and actuator face each other in parallel

Values apply to the named standard actuator; other approved actuator shapes have different distances.

Actuator is a separate order

The standard compact PSEN cs4.1 actuator is order number 541180. Mount it on the moving guard opposite the fixed switch. The 8 mm assured operating distance and 20 mm assured release distance above refer to that actuator, not every transponder in the PSENcode range.

Power and OSSD outputs

Rated supply

24 V DC

Supply tolerance

−20% / +20%

19.2–28.8 V DC.

Power consumption

1 W

No-load current

20 mA

Safety outputs

2 OSSD semiconductor outputs

Switching current per output

100 mA maximum

Maximum output test-pulse duration

450 µs

Safety-input channels

None — standalone n version

Series connection

Not supported

Connector pins and Pilz cable colours

1 / brown

A1 — +24 V DC

2 / white

12 — OSSD output, channel 1

3 / blue

A2 — 0 V

4 / black

22 — OSSD output, channel 2

5 / grey

Do not connect

A dedicated five-pin standalone connection

Pins 2 and 4 provide the two OSSD channels directly to the safety evaluation device. This five-pin interface has no S11/S21 series inputs and no externally usable Y32/Y1 diagnostic pair. Pin 5 remains unconnected; it is not a status-output pin.

Power-supply installation

Use a SELV/PELV supply with protective electrical separation, overvoltage protection at or below 35 V DC, and a 2–4 A quick-acting supply fuse. Isolate the supply before connecting or disconnecting the switch.

Opening the guard removes both safety outputs

When the approved actuator moves beyond the assured release distance or is no longer detected, both OSSD outputs switch off. Evaluate both channels with plausibility monitoring; the switch is not a general-purpose single-channel door sensor.

Switching and response times

Maximum switching frequency

3 Hz

Power-up delay

1 s

Actuator switch-on delay

60 ms typical / 150 ms maximum

Actuator switch-off delay

40 ms typical / 260 ms maximum

Risk time to EN 60947-5-3

260 ms

Safety evaluation

Two-channel OSSD capability

PL e, Category 4 / SIL CL 3

With an approved actuator and two-channel processing; the complete safety function requires its own assessment.

Maximum mission time

20 years

Local status LEDs

Power/Fault indicates readiness or a fault, and Safety Gate indicates an actuator within range. The five-pin n model does not provide the eight-wire SDD interface.

Housing, cabling and environment

Housing dimensions (H × W × D)

37 × 26 × 18 mm

Manufacturer technical-table nominal dimensions; the detailed drawing gives 26.4 mm width.

Housing material

PBT

Switch weight

40 g

Device weight, not packed shipping weight.

Housing protection

IP6K9K

Connector protection

IP67

Housing and connector ratings are stated separately.

Operating temperature

−25 to +70 °C

+70 °C below 2000 m; the manufacturer specifies +60 °C at the maximum 4000 m altitude.

Minimum spacing between switches

100 mm

Maximum fixing torque

0.8 N·m

Manufacturer dimensional drawing

Original PSEN cs4.1n drawing, dimensions in millimetres. Includes the M12 pigtail and connector envelope.

Pilz original PSEN cs4.1n switch dimension drawing with mounting holes and M12 connector

Pilz original PSEN cs4.1n switch dimension drawing with mounting holes and M12 connector

Original PSEN cs4.1n drawing, dimensions in millimetres. Includes the M12 pigtail and connector envelope.

Align the sensing faces; provide a separate door stop

Install the switch and actuator opposite each other in parallel and secure them against movement. Neither component is a mechanical end stop. Keep the specified separation between adjacent switches, and account for the effect of electrically or magnetically conductive mounting materials on the sensing distances.

Allow space for the pigtail and mating cable

The M12 five-pin male connector requires the corresponding female connection cable, ordered separately. Keep access to the connector and reserve bending space beyond the body dimensions.

Sourcing and order support

Order the exact product and condition your project requires, with assistance from quotation through delivery.

Exact product identification

Your quotation references the complete manufacturer part number to keep the requested product clear.

Condition options

Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.

International delivery

Shipping options are prepared around your destination, quantity and requested delivery date.

Documentation support

Access available manufacturer product data, manuals and certificates associated with the order number.