Skip to content

Omron NX1P2 CPU Units

Omron NX1P2 machine automation CPU units with built-in digital I/O, EtherCAT and EtherNet/IP. Compare the complete six-model family by 24/40-point I/O, NPN/PNP output circuits and zero, two or four motion-control servo axes.

View products

Match motion, load wiring and expansion power

The complete order number determines the available motion-control axes and the digital-output circuit. Expansion capability also depends on the station power arrangement.

  1. 01

    Count each type of axis separately

    Four, six or eight maximum used real axes does not mean the same number of coordinated motion axes. The 9024 / 1040 / 1140 classes provide zero / two / four motion-control servo axes, plus four single-axis positioning axes each.

    • Synchronized and coordinated functions belong to motion-control axes.
    • Choose the CPU class for the machine’s motion functions, not only its total axis count.
  2. 02

    DT and DT1 need different output wiring

    DT sinks current through NPN outputs without built-in load short-circuit protection. DT1 sources current through PNP outputs with point-level protection. Both have 300 mA channel ratings and additional common-current limits.

    • 24-point CPUs: 2.4 A per common and CPU.
    • 40-point CPUs: 1.8 A per common, 3.6 A per CPU.
  3. 03

    Separate NX electronics power from field I/O power

    The CPU supports eight local NX units and provides up to 10 W of NX unit electronics power. It does not provide NX-bus field I/O power; modules using that supply require an Additional I/O Power Supply Unit.

    • Allow for CPU startup inrush and expansion load.
    • NX1W serial/analog boards, battery and machine field supplies are separately selected.

NX1P2 engineering resources

Use the exact model for wiring and axis configuration, with the corresponding family hardware and software documentation.