Skip to content
SICK deTec4 Core safety light curtain bar

SICK C4C-EA03010A10000 deTec4 Core 300 mm Receiver

C4C-EA03010A10000

Single deTec4 Core receiver for a 300 mm nominal protective field and 14 mm detection capability. Pairs with C4C-SA03010A10000. 24 V DC, M12 5-pin system connection; matching counterpart ordered separately.

Availability
In Stock
Available quantity
12 units
Condition
New Original
SKU
C4C-EA03010A10000
Lifecycle
Active
$789.73
Request a quote
Ask a product question

12 months warranty

Warranty coverage and terms are confirmed with your order.

Fast shipping

We coordinate the fastest available shipping option for your destination.

Secure payment

Available payment methods are handled through secure payment channels.

Worldwide delivery

Carrier and delivery options are confirmed for your destination before dispatch.

Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of SICK. Brand names are used for identification and compatibility purposes only. Read disclaimer

Technical specifications

Component role, detection performance and installation details for C4C-EA03010A10000.

Exact ordered component

Type code

C4C-EA03010A10000

SICK part number

1211463

System part

Receiver only

Matching counterpart

C4C-SA03010A10000

Resolution

14 mm

Nominal protective field height

300 mm

Effective protective field / housing length

313 mm

System response time at this height

11 ms

Field width, guaranteed operating range

0–8 m

Field width, typical

0–10 m

Synchronization

Optical

One component of a matched system

This order code supplies the receiver bar. A complete protective field requires the corresponding sender C4C-SA03010A10000, matching height and resolution, suitable mounting and connections, and integration into the machine’s safety control.

Receiver role

The receiver monitors the light field and provides two monitored PNP semiconductor OSSDs. The outputs switch off when the protective field is interrupted or a relevant fault is detected. Connect both OSSD channels to the downstream safety circuit.

Height, resolution and width describe different dimensions

The nominal protective height describes the monitored vertical span; 14 mm is the detection capability, and scanning width is the sender-to-receiver separation. Use the signal-reserve range when laying out the station; typical optical reach is not an unconditional installation distance.

Power and connections

Supply at device

19.2–28.8 V DC; 24 V DC nominal, SELV/PELV

Typical device power

1.92 W excluding power delivered through OSSD loads

System connection

M12 male, 5-pin, on 150 mm cable

Pin 1 / brown

+24 V DC

Pin 3 / blue

0 V DC

Pin 2 / white

OSSD1

Pin 4 / black

OSSD2

Pin 5 / gray

Not assigned

OSSD current capacity

300 mA each

Safe fault state

At least one OSSD in OFF state

Manufacturer sender and receiver pin assignments

Operating instructions p.46. Sender reserved pins and receiver OSSD pins have different functions.

Manufacturer sender and receiver pin assignments

Manufacturer sender and receiver pin assignments

Operating instructions p.46. Sender reserved pins and receiver OSSD pins have different functions.

Size the power circuit and receiving inputs

The manufacturer requires a supply that buffers brief 20 ms interruptions and a maximum 4 A fuse in the 24 V device supply circuit. The receiving safety inputs must tolerate the receiver’s OSSD test pulses; the receiver power figure excludes the current supplied to external OSSD loads.

Device capability and machine integration

The deTec4 Core system is Type 4, Category 4, PL e and SIL 3 under the manufacturer’s stated conditions. Place it at the calculated separation from the hazard using the complete stopping time, including the device response, downstream control and machine stop. Implement restart interlock and external device monitoring in the downstream safety control where required by the application.

Installed geometry

Housing cross-section

31 × 34 mm, plus bracket

Housing length

313 mm

Approximate component weight

300 g, ±50 g

Housing

Aluminum extruded profile

Front screen

Scratch-resistant polycarbonate

Ingress protection

IP65 / IP67

Ambient operation

−30 to +55 °C

Humidity

15–95%, noncondensing

Manufacturer dimensions and height-to-length table

Operating instructions p.64. Select the row for the nominal protective height; brackets add to the installed envelope.

Manufacturer dimensions and height-to-length table

Manufacturer dimensions and height-to-length table

Operating instructions p.64. Select the row for the nominal protective height; brackets add to the installed envelope.

Prevent reach-around and optical bypass

Mount sender and receiver opposite each other with clear optical alignment. Arrange guarding to prevent reaching over, under or around the field, and keep reflective surfaces outside the specified minimum distance. Perform the prescribed test-rod and restart checks after installation or changes.

Match the Core version and full order code

The selected references are deTec4 Core for normal industrial environments. deTec4 Prime, Core HG, explosion-protected versions and 30 mm models have separate identifiers and capabilities. Matching external appearance does not establish that components from different versions form a supported pair.

Sourcing and order support

Order the exact product and condition your project requires, with assistance from quotation through delivery.

Exact product identification

Your quotation references the complete manufacturer part number to keep the requested product clear.

Condition options

Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.

International delivery

Shipping options are prepared around your destination, quantity and requested delivery date.

Documentation support

Access available manufacturer product data, manuals and certificates associated with the order number.