Skip to content
Allen-Bradley Compact 5000 isolated relay output module

Allen-Bradley 5069-OX4I Compact 5000 Isolated Changeover Relay Output Module

5069-OX4I

5069-OX4I Compact 5000 isolated changeover relay output module. Four individually isolated Form C changeover relay channels, each with common, normally-open and normally-closed terminals. Requires a separately ordered 5069-RTB18 terminal block.

Availability
In Stock
Available quantity
12 units
Condition
New Original
SKU
5069-OX4I
Lifecycle
Active
$580.00
Request a quote
Ask a product question

12 months warranty

Warranty coverage and terms are confirmed with your order.

Fast shipping

We coordinate the fastest available shipping option for your destination.

Secure payment

Available payment methods are handled through secure payment channels.

Worldwide delivery

Carrier and delivery options are confirmed for your destination before dispatch.

Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Allen-Bradley. Brand names are used for identification and compatibility purposes only. Read disclaimer

Technical specifications

Signal ratings, field-power arrangement and terminal wiring for 5069-OX4I.

Isolated Changeover Relay Output Module

5069-OX4I is an Allen-Bradley Compact 5000 standard digital I/O module. Four individually isolated Form C changeover relay channels, each with common, normally-open and normally-closed terminals. It expands a compatible Logix system; it is not a CPU, Ethernet adapter or safety I/O module.

Electrical characteristics

Catalog number

5069-OX4I

Channels

4

Signal / load range

5–264 V AC / 5–125 V DC operating range

Contact arrangement

4 × Form C, SPDT changeover

Resistive contact rating

2 A per channel at 5–30 V DC or 5–264 V AC

Module current limit

8 A maximum

Minimum load current

10 mA

Output delay, maximum

15 ms on and 15 ms off

Rated-load switching

One operation every 3 s

Off-state leakage

0 mA; dry contacts without onboard snubbers

Four changeover channels, not eight independent outputs

Each channel operates its NO and NC contacts together around one common. It is therefore four SPDT channels rather than eight independently controlled points. The 2 A resistive rating applies to 5–30 V DC or 5–264 V AC; the wider 125 V DC operating range uses the separate contact make/break table. The module has a 10 mA minimum load, unlike OW4I’s 1 mA minimum.

Configure the output response to Program and Fault modes

Each output can be configured to turn off, turn on or hold its last state; off is the default. Fault-mode duration is also configurable. Set these behaviors deliberately for the connected actuator. These standard outputs do not replace a safety-rated output function.

Power and terminal requirements

MOD electronics supply

75 mA at 18–32 V DC

SA field-side demand / placement

No SA current draw; DC SA bus required

Maximum power dissipation

2.6 W

Field terminal block

5069-RTB18-SPRING or 5069-RTB18-SCREW; ordered separately

Screw RTB tightening torque

0.4 N·m

Conductor size

0.34–1.5 mm² (22–16 AWG), copper, ≥105 °C

Wire stripping

10 mm spring RTB; 12 mm screw RTB

Keep MOD, SA and load power distinct

The relay contacts switch externally supplied load circuits. The module does not draw SA current, but it remains a DC-type module and must be installed on a DC SA segment. An AC load switched by a dry contact does not make the module an AC SA device.

Channel wiring

Use each channel’s N/C, N/O and COMMON terminals with external load power. The final unused positions are not additional channels. The module uses a DC SA segment even if external relay-contact circuits switch AC; contact load voltage and SA bus type are separate decisions.

Original manufacturer wiring diagram

Rockwell Automation 5069-TD001P-EN-P, March 2026, p.20. Terminal assignment and field-power connections.

5069-OX4I manufacturer terminal wiring, field supply connections and wiring notes

5069-OX4I manufacturer terminal wiring, field supply connections and wiring notes

Rockwell Automation 5069-TD001P-EN-P, March 2026, p.20. Terminal assignment and field-power connections.

The terminal block is a separate order item

Compact 5000 I/O modules do not include the removable terminal block. Choose either the 18-position spring or screw RTB for the wiring method. Both use one wire per terminal; the screw torque applies to the screw RTB, not the spring mechanism.

Local or adapter-based I/O

Install these 5069 modules to the right of a compatible CompactLogix 5380, CompactLogix 5480 or Compact GuardLogix 5380 controller, or use a supported Compact 5000 EtherNet/IP adapter for a remote I/O station. Add the correct module profile and electronic keying in Studio 5000 Logix Designer. A remote station needs its adapter; the I/O module itself has no standalone Ethernet connection.

Module envelope and environment

Dimensions, H × W × D

144.6 × 22 × 105.4 mm

Slot width

1 standard Compact 5000 slot

Approximate weight

175 g

Operating surrounding air

0 to +60 °C

Nonoperating temperature

−40 to +85 °C

Relative humidity

5–95%, noncondensing

Enclosure type

Open style; enclosed installation required

DIN rail

EN50022, 35 × 7.5 mm, compatible zinc-plated steel

Allow system clearance, not only module width

For local CompactLogix 5380 systems, mount the I/O assembly horizontally. System clearances depend on the controller and operating temperature: standard CompactLogix 5380 guidance is 50.8 mm at 50/55 °C and 101.6 mm at 60 °C. A standard-only adapter system uses 25.4 mm on all sides; adding safety modules changes the system clearance. Finish the last module with the system end cap.

A 5069 catalog number defines the platform

Compact 5000 5069 modules are not 1769 Compact I/O or 1734 POINT I/O plug-in replacements. Match input/output role, signal type, terminal assignment, software profile and power segment. A matching channel count alone does not establish interchangeability.

Sourcing and order support

Order the exact product and condition your project requires, with assistance from quotation through delivery.

Exact product identification

Your quotation references the complete manufacturer part number to keep the requested product clear.

Condition options

Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.

International delivery

Shipping options are prepared around your destination, quantity and requested delivery date.

Documentation support

Access available manufacturer product data, manuals and certificates associated with the order number.