Skip to content
Allen-Bradley 5069-OB8 Compact 5000 digital I/O module

Allen-Bradley 5069-OB8 Compact 5000 High-Current DC Output Module

5069-OB8

5069-OB8 Compact 5000 high-current dc output module. Eight sourcing DC outputs in two groups of four, rated 2 A per channel and powered through local actuator connections. Requires a separately ordered 5069-RTB18 terminal block.

Availability
In Stock
Available quantity
12 units
Condition
New Original
SKU
5069-OB8
Lifecycle
Active
$390.00
Request a quote
Ask a product question

12 months warranty

Warranty coverage and terms are confirmed with your order.

Fast shipping

We coordinate the fastest available shipping option for your destination.

Secure payment

Available payment methods are handled through secure payment channels.

Worldwide delivery

Carrier and delivery options are confirmed for your destination before dispatch.

Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Allen-Bradley. Brand names are used for identification and compatibility purposes only. Read disclaimer

Technical specifications

Signal ratings, field-power arrangement and terminal wiring for 5069-OB8.

High-Current DC Output Module

5069-OB8 is an Allen-Bradley Compact 5000 standard digital I/O module. Eight sourcing DC outputs in two groups of four, rated 2 A per channel and powered through local actuator connections. It expands a compatible Logix system; it is not a CPU, Ethernet adapter or safety I/O module.

Electrical characteristics

Catalog number

5069-OB8

Channels

8

Signal / load range

10–32 V DC

Nominal voltage

24 V DC

Output current, maximum

2 A per channel; 8 A per group; 16 A per module

Channel groups

OUT0–3 on LA0; OUT4–7 on LA1

On-state voltage drop, maximum

0.25 V DC

Off-state leakage, maximum

0.5 mA per point

Minimum on-state load

1 mA

Output delay

≤100 µs at 25 °C and 2 A

Per-point surge

4 A for 10 ms, repeatable every 2 s

Power each four-channel group at its LA terminals

LA0 supplies channels 0–3 and LA1 supplies channels 4–7. The module can provide higher per-channel current than OB16, but the field supply and conductors must support the 8 A group and 16 A module limits. Supported diagnostics include field-power loss, no load and output short-circuit/overload/overtemperature; protection does not replace the branch protection design.

Configure the output response to Program and Fault modes

Each output can be configured to turn off, turn on or hold its last state; off is the default. Fault-mode duration is also configurable. Set these behaviors deliberately for the connected actuator. These standard outputs do not replace a safety-rated output function.

Power and terminal requirements

MOD electronics supply

75 mA at 18–32 V DC

SA field-side demand / placement

No SA current draw; DC SA bus required

Maximum power dissipation

3.2 W

Field terminal block

5069-RTB18-SPRING or 5069-RTB18-SCREW; ordered separately

Screw RTB tightening torque

0.4 N·m

Conductor size

0.34–1.5 mm² (22–16 AWG), copper, ≥105 °C

Wire stripping

10 mm spring RTB; 12 mm screw RTB

Keep MOD, SA and load power distinct

The module electronics draw MOD power, while the outputs take field power from the LA terminals on the module RTB. This module does not draw SA current, but it must still be installed on a DC SA segment. LA power is not a reason to place a DC module on an AC SA bus.

Channel wiring

Feed the LA0 and LA1 power terminals on the RTB. Each group has its own positive supply and return connections as shown in the original diagram. The module passes DC SA power onward but does not use that bus to supply the actuator outputs.

Original manufacturer wiring diagram

Rockwell Automation 5069-TD001P-EN-P, March 2026, p.13. Terminal assignment and field-power connections.

5069-OB8 manufacturer terminal wiring, field supply connections and wiring notes

5069-OB8 manufacturer terminal wiring, field supply connections and wiring notes

Rockwell Automation 5069-TD001P-EN-P, March 2026, p.13. Terminal assignment and field-power connections.

The terminal block is a separate order item

Compact 5000 I/O modules do not include the removable terminal block. Choose either the 18-position spring or screw RTB for the wiring method. Both use one wire per terminal; the screw torque applies to the screw RTB, not the spring mechanism.

Local or adapter-based I/O

Install these 5069 modules to the right of a compatible CompactLogix 5380, CompactLogix 5480 or Compact GuardLogix 5380 controller, or use a supported Compact 5000 EtherNet/IP adapter for a remote I/O station. Add the correct module profile and electronic keying in Studio 5000 Logix Designer. A remote station needs its adapter; the I/O module itself has no standalone Ethernet connection.

Module envelope and environment

Dimensions, H × W × D

144.6 × 22 × 105.4 mm

Slot width

1 standard Compact 5000 slot

Approximate weight

175 g

Operating surrounding air

0 to +60 °C

Nonoperating temperature

−40 to +85 °C

Relative humidity

5–95%, noncondensing

Enclosure type

Open style; enclosed installation required

DIN rail

EN50022, 35 × 7.5 mm, compatible zinc-plated steel

Allow system clearance, not only module width

For local CompactLogix 5380 systems, mount the I/O assembly horizontally. System clearances depend on the controller and operating temperature: standard CompactLogix 5380 guidance is 50.8 mm at 50/55 °C and 101.6 mm at 60 °C. A standard-only adapter system uses 25.4 mm on all sides; adding safety modules changes the system clearance. Finish the last module with the system end cap.

A 5069 catalog number defines the platform

Compact 5000 5069 modules are not 1769 Compact I/O or 1734 POINT I/O plug-in replacements. Match input/output role, signal type, terminal assignment, software profile and power segment. A matching channel count alone does not establish interchangeability.

Sourcing and order support

Order the exact product and condition your project requires, with assistance from quotation through delivery.

Exact product identification

Your quotation references the complete manufacturer part number to keep the requested product clear.

Condition options

Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.

International delivery

Shipping options are prepared around your destination, quantity and requested delivery date.

Documentation support

Access available manufacturer product data, manuals and certificates associated with the order number.