Skip to content
Allen-Bradley 5069-OA16 Compact 5000 digital I/O module

Allen-Bradley 5069-OA16 Compact 5000 AC Output Module

5069-OA16

5069-OA16 Compact 5000 ac output module. 16 solid-state AC outputs, 0.5 A per channel with a 4 A total module limit, using AC SA field power. Requires a separately ordered 5069-RTB18 terminal block.

Availability
In Stock
Available quantity
12 units
Condition
New Original
SKU
5069-OA16
Lifecycle
Active
$1,035.83
Request a quote
Ask a product question

12 months warranty

Warranty coverage and terms are confirmed with your order.

Fast shipping

We coordinate the fastest available shipping option for your destination.

Secure payment

Available payment methods are handled through secure payment channels.

Worldwide delivery

Carrier and delivery options are confirmed for your destination before dispatch.

Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Allen-Bradley. Brand names are used for identification and compatibility purposes only. Read disclaimer

Technical specifications

Signal ratings, field-power arrangement and terminal wiring for 5069-OA16.

AC Output Module

5069-OA16 is an Allen-Bradley Compact 5000 standard digital I/O module. 16 solid-state AC outputs, 0.5 A per channel with a 4 A total module limit, using AC SA field power. It expands a compatible Logix system; it is not a CPU, Ethernet adapter or safety I/O module.

Electrical characteristics

Catalog number

5069-OA16

Channels

16

Signal / load range

85–264 V AC, 47–63 Hz

Nominal output voltage

120/240 V AC

Output current, maximum

0.5 A per channel; 4 A per module

On-state voltage drop, maximum

1.5 V AC at 0.5 A

Off-state leakage, maximum

1 mA

Output delay

Half a cycle, typical at 0–60 °C

Per-point surge

5 A for 25 ms, repeatable every 2 s

Apply both the point limit and the module limit

Sixteen 0.5 A outputs do not provide an 8 A aggregate rating: the module maximum is 4 A. It supports field-power-loss detection but does not provide output short-circuit/overload protection, per-channel no-load diagnostics or scheduled outputs. Small AC loads can respond to the off-state leakage, so include the load’s off-state behavior in the circuit design.

Configure the output response to Program and Fault modes

Each output can be configured to turn off, turn on or hold its last state; off is the default. Fault-mode duration is also configurable. Set these behaviors deliberately for the connected actuator. These standard outputs do not replace a safety-rated output function.

Power and terminal requirements

MOD electronics supply

100 mA at 18–32 V DC

SA field-side demand / placement

4 A at 85–264 V AC

Maximum power dissipation

3.4 W

Field terminal block

5069-RTB18-SPRING or 5069-RTB18-SCREW; ordered separately

Screw RTB tightening torque

0.4 N·m

Conductor size

0.34–1.5 mm² (22–16 AWG), copper, ≥105 °C

Wire stripping

10 mm spring RTB; 12 mm screw RTB

Keep MOD, SA and load power distinct

This module needs an AC SA power segment. Separate AC and DC SA groups with a 5069-FPD field potential distributor; changing the field bus to AC does not change the 18–32 V DC MOD electronics supply. A Compact GuardLogix 5380 cannot provide AC SA power directly, so its local AC module group requires an intervening FPD.

Channel wiring

Connect the AC supply to the device feeding this module’s SA segment. OUT0–OUT15 use the shared AC SA return; the final two RTB positions are unused. This is a solid-state AC output module, not a dry-contact relay output.

Original manufacturer wiring diagram

Rockwell Automation 5069-TD001P-EN-P, March 2026, p.12. Terminal assignment and field-power connections.

5069-OA16 manufacturer terminal wiring, field supply connections and wiring notes

5069-OA16 manufacturer terminal wiring, field supply connections and wiring notes

Rockwell Automation 5069-TD001P-EN-P, March 2026, p.12. Terminal assignment and field-power connections.

The terminal block is a separate order item

Compact 5000 I/O modules do not include the removable terminal block. Choose either the 18-position spring or screw RTB for the wiring method. Both use one wire per terminal; the screw torque applies to the screw RTB, not the spring mechanism.

Local or adapter-based I/O

Install these 5069 modules to the right of a compatible CompactLogix 5380, CompactLogix 5480 or Compact GuardLogix 5380 controller, or use a supported Compact 5000 EtherNet/IP adapter for a remote I/O station. Add the correct module profile and electronic keying in Studio 5000 Logix Designer. A remote station needs its adapter; the I/O module itself has no standalone Ethernet connection.

Module envelope and environment

Dimensions, H × W × D

144.6 × 22 × 105.4 mm

Slot width

1 standard Compact 5000 slot

Approximate weight

175 g

Operating surrounding air

0 to +60 °C

Nonoperating temperature

−40 to +85 °C

Relative humidity

5–95%, noncondensing

Enclosure type

Open style; enclosed installation required

DIN rail

EN50022, 35 × 7.5 mm, compatible zinc-plated steel

Allow system clearance, not only module width

For local CompactLogix 5380 systems, mount the I/O assembly horizontally. System clearances depend on the controller and operating temperature: standard CompactLogix 5380 guidance is 50.8 mm at 50/55 °C and 101.6 mm at 60 °C. A standard-only adapter system uses 25.4 mm on all sides; adding safety modules changes the system clearance. Finish the last module with the system end cap.

A 5069 catalog number defines the platform

Compact 5000 5069 modules are not 1769 Compact I/O or 1734 POINT I/O plug-in replacements. Match input/output role, signal type, terminal assignment, software profile and power segment. A matching channel count alone does not establish interchangeability.

Sourcing and order support

Order the exact product and condition your project requires, with assistance from quotation through delivery.

Exact product identification

Your quotation references the complete manufacturer part number to keep the requested product clear.

Condition options

Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.

International delivery

Shipping options are prepared around your destination, quantity and requested delivery date.

Documentation support

Access available manufacturer product data, manuals and certificates associated with the order number.