Exact product identification
Your quotation references the complete manufacturer part number to keep the requested product clear.

S203-C20
S200 3-pole C-curve MCB, 20 A, 6 kA Icn under IEC/EN 60898-1 at 400 V AC. Thermal-magnetic overcurrent protection, screw terminals and 52.5 mm-wide DIN-rail housing. ABB order code 2CDS253001R0204.
Warranty coverage and terms are confirmed with your order.
We coordinate the fastest available shipping option for your destination.
Available payment methods are handled through secure payment channels.
Carrier and delivery options are confirmed for your destination before dispatch.
Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of ABB. Brand names are used for identification and compatibility purposes only. Read disclaimer
Protection ratings, terminal connections and installation data for S203-C20.
S203-C20 is a 3-pole, 20 A ABB S200 miniature circuit breaker. Its delayed thermal release protects against overload and its electromagnetic release responds to short circuits. It has three protected poles in a 52.5 mm-wide housing for three-phase circuit arrangements. This is an MCB, not a residual-current device.
S203-C20
2CDS253001R0204
System pro M compact S200
20 A
C
3
3P
400 V AC
50 / 60 Hz
440 V
30 °C
6 kA
At 400 V AC.
10 kA
At 400 V AC.
7.5 kA
At 400 V AC.
The 6 kA Icn and 10 kA Icu values describe different standard-based ratings; they do not make this a higher-capacity S200M breaker. Under UL 1077, standard S200 devices are supplementary protectors, not UL 489 branch-circuit breakers.
Use the 20 A rating together with conductor capacity, load starting behavior and the prospective short-circuit current at the installation point. The C characteristic defines the trip response; the breaker is not a dedicated adjustable motor-overload relay. Residual-current protection requires a separate suitable device.
S203-C20 is 3P, not 3P+N or 4P. It provides three protected current paths; a fourth neutral pole is not part of this product.
Failsafe bi-directional cylinder-lift screw terminals
0.75–35 mm²
0.75–25 mm²
0.75–25 mm²
12.5 mm
2.8 N·m
Pozidriv 2
Either side, as stated by ABB
The System pro M compact terminal design supports conductor and busbar connections. Select a busbar with the matching pitch, pole arrangement and current rating. Auxiliary/signaling contacts are separately selected accessories; the standard breaker itself provides red ON / green OFF mechanical contact-position indication, not a remote electrical output.
52.5 mm × 88 mm × 69 mm
3
0.345 kg
7.5 W
Total device value, not an extra value per pole.
DIN rail, IEC 60715
Any
−25 to +55 °C
−40 to +70 °C
IP20; IP40 in an enclosure with cover
S200 DIN-rail mounting and release
Original ABB S200 installation illustration, from instruction 2CDS207104P0002. Shows the standard S200 rail latch; busbar-assisted and S300 procedures are separate.
The thermal release responds to surrounding temperature and neighboring devices. The IEC/EN 60898-1 reference temperature is 30 °C; use the manufacturer’s temperature/grouping factors for a tightly populated or hotter cabinet. IP40 applies with the enclosure cover, not to a loose breaker on an open rail.
Order S203-C20 as 2CDS253001R0204. A similar S200M, S200P, S200C or neutral-switching suffix changes the device specification. This 3P C20 configuration must not be substituted solely because another breaker fits the same DIN rail.
Manufacturer product data, family selection tables and installation instructions.
Order the exact product and condition your project requires, with assistance from quotation through delivery.
Your quotation references the complete manufacturer part number to keep the requested product clear.
Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.
Shipping options are prepared around your destination, quantity and requested delivery date.
Access available manufacturer product data, manuals and certificates associated with the order number.