Skip to content

Schneider Electric TeSys Deca Contactors

Schneider Electric TeSys Deca three-pole nonreversing contactors. The first batch covers ten 24 V DC standard-coil references from 9 to 80 A AC-3, with 3 NO main poles and 1 NO + 1 NC auxiliaries.

View products

Select duty, coil and protection together

Current alone does not define a suitable motor switching device.

  1. 01

    Separate AC-1 and motor duty

    Use the published operational rating and motor kW at the actual voltage. AC-1 resistive ratings are not AC-3 motor ratings.

    • AC-3/AC-3e for the stated motor duty.
    • AC-4 inching or plugging requires its own rating.
  2. 02

    Match the control supply

    BD identifies the 24 V DC standard-coil selection in this batch. Size the driver for pickup and holding demand.

    • Do not substitute 24 V AC because the nominal number matches.
    • BL low-consumption and BNE wide-range coils are different order numbers.
  3. 03

    Coordinate protection and mounting

    A contactor switches the motor branch; overload and short-circuit protection are separate functions.

    • SCCR depends on the specified tested combination.
    • Allow accessory projections and use the correct terminal torque.