FANUC αi-B 200 V Servo Amplifier Modules
FANUC αiSV-B servo-axis amplifier modules for 200 V-class CNC drive systems. Compare single- and multi-axis current configurations, FSSB integration, cabinet outlines and dynamic-braking requirements. Separate from spindle amplifiers and power supplies.
View productsαiSV-B 200 V servo-axis modules
The initial selection covers six standard single-axis modules and four compact dual-axis configurations. Match the complete A06B order code and each motor channel, not the model-size number alone.
Showing 1–8 of 8
Drives and motion
FANUC A06B-6240-H101 αiSV 4-B Servo Amplifier
A06B-6240-H101
New Original
$2,080.00
Drives and motion
FANUC A06B-6240-H103 αiSV 20-B Servo Amplifier
A06B-6240-H103
New Original
$2,099.00
Drives and motion
FANUC A06B-6240-H104 αiSV 40-B Servo Amplifier
A06B-6240-H104
New Original
$4,997.00
Drives and motion
FANUC A06B-6240-H105 αiSV 80-B Servo Amplifier
A06B-6240-H105
New Original
$3,900.00
Drives and motion
FANUC A06B-6240-H106 αiSV 160-B Servo Amplifier
A06B-6240-H106
New Original
$5,222.00
Drives and motion
FANUC A06B-6240-H109 αiSV 360-B Servo Amplifier
A06B-6240-H109
New Original
$7,837.00
Drives and motion
FANUC A06B-6240-H201 αiSV 4/4-B Servo Amplifier
A06B-6240-H201
New Original
$4,199.00
Drives and motion
FANUC A06B-6240-H203 αiSV 4/20-B Servo Amplifier
A06B-6240-H203
New Original
$3,135.00
Choose by motor-channel configuration
The A06B-6240 family is the 200 V αiSV-B servo-axis platform. This collection’s first batch focuses on standard single- and dual-axis modules.
Single-axis — 4-B through 360-B
Six standard H1xx modules cover rated RMS output currents from 2.5 to 130 A. The model-size numbers identify nominal peak-current classes, not continuous amperage.
Dual-axis — L and M channels
The first four H2xx configurations are 4/4-B, 4/20-B, 20/20-B and 20/40-B. Each channel has its own current rating and motor feedback connection; asymmetric modules have a fixed L/M current split.
Keep the amplifier and drive-system roles separate
A servo module is one component of the CNC drive system, not a complete mains-powered motion package.
- 01
200 V system, shared DC-link power
The separate αiPS-B receives the AC mains and feeds the common DC link. αiSV-B uses that DC link plus a separate 24 V control supply.
- Do not wire three-phase mains to the servo module’s TB1 DC-link terminals.
- FSSB optical communication is distinct from Ethernet-based motion networks.
- 02
Compare Arms and Apeak separately
Rated RMS current determines continuous channel capacity under the specified thermal conditions. The nominal peak-current limit describes a different capability.
- Select the motor and amplifier using the documented combinations.
- Use the HRV-mode and temperature derating curve for the actual installation.
- 03
Treat 360-B braking as a separate configuration
αiSV 360-B requires an external dynamic brake module, unlike the smaller selected modules. The external DBM is not included by the amplifier order code.
- A motor holding brake and dynamic braking perform different jobs.
- STO availability also depends on hardware edition and servo software.
- 04
Match exact order code and generation
This collection excludes 400 V HV modules, spindle amplifiers, power supplies, combined servo/spindle units, βi amplifiers and αi-D. The first batch does not include SSM-support H12x or three-axis variants.
- The existing spindle-amplifier collection remains separate.
- Do not carry the spindle-module #H600 suffix into these complete base servo order codes.