Skip to content
Siemens SIMATIC ET 200SP DI 8x24VDC SRC BA digital input module

Siemens ET 200SP DI 8x24VDC SRC BA 6ES7131-6BF61-0AA0

6ES7131-6BF61-0AA0

Eight-channel sourcing digital input module for 24 V DC NPN, M-reading signals. Basic diagnostics and configurable filtering; type A0 BaseUnit, CC02 coding and 200 m unshielded cable limit.

Availability
In Stock
Available quantity
12 units
Condition
New Original
SKU
6ES7131-6BF61-0AA0
Lifecycle
Active
$172.00
Request a quote
Ask a product question

12 months warranty

Warranty coverage and terms are confirmed with your order.

Fast shipping

We coordinate the fastest available shipping option for your destination.

Secure payment

Available payment methods are handled through secure payment channels.

Worldwide delivery

Carrier and delivery options are confirmed for your destination before dispatch.

Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Siemens. Brand names are used for identification and compatibility purposes only. Read disclaimer

Technical specifications

Signal characteristics, sensor wiring and configuration for the DI 8x24VDC SRC BA.

A sourcing input for NPN field signals

The SRC Basic variant is an eight-channel sourcing input module for NPN, M-reading signals. It is a digital input module: “SRC” describes the input circuit, not an output function.

Signal characteristics

Digital inputs

8

Input logic

Sourcing input for NPN signals (M-reading)

IEC 61131 input characteristic

Type 1

Nominal input voltage

24 V DC

Signal 0 voltage range

+30 to −5 V

Referenced to L+, not M

Signal 1 voltage range

−11 to −30 V

Referenced to L+, not M

Typical input current at signal 1

6 mA

Configurable input delay

0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms

Additional line-length-dependent delay: 30–500 µs

2-wire sensor quiescent current, maximum

1.5 mA

Shielded cable length, maximum

1000 m

Unshielded cable length, maximum

200 m

Do not exchange SRC and P-reading inputs by appearance

This module evaluates input voltage relative to L+. Its signal thresholds and M-return wiring differ from the PNP, P-reading input modules. The same type A0 BaseUnit family does not make the input logic interchangeable.

BaseUnit requirements by sensor wiring

BaseUnit requirements by sensor wiring
Parameter / conditionBaseUnit arrangement
1-wireBU type A0
2-wireBU type A0
3-wireBU type A0 with AUX terminals, or a potential distributor module
4-wireBU type A0 plus a potential distributor module

Use the M-return terminal arrangement

The one- and two-wire connection drawing assigns terminals 9–16 to M return paths rather than the PNP module’s sensor-supply connections. Use the SRC diagram for NPN sensors; do not copy the wiring from a P-reading DI module.

Start or continue the potential group

A light-colored BaseUnit starts a new potential group; a dark-colored BaseUnit continues the voltage buses from the module on its left. Select the module’s potential-group parameter to match the physical BaseUnit arrangement. The electronic module and BaseUnit are separate order items.

Terminal assignment and signal path

One- and two-wire sensor wiring

02/2019 · A5E32855511-AD, Figure 3-1. Original wiring and block diagram, including terminal numbers, voltage buses and the complete legend.

One- and two-wire sensor wiring

Siemens DI 8x24VDC SRC BA one- and two-wire sensor wiring with terminal markings and circuit legend

02/2019 · A5E32855511-AD, Figure 3-1. Original wiring and block diagram, including terminal numbers, voltage buses and the complete legend.

Supply and isolation

Supply voltage L+

24 V DC

Permissible range: 19.2–28.8 V DC

Reverse polarity protection

Yes

Module current consumption, maximum

53 mA

Typical power loss

1.5 W

Encoder-supply short-circuit protection

Not provided

Channel-to-channel isolation

No

Isolation from backplane bus

Yes

Fault detection and indication

Supply voltage monitoring

Supported

Wire-break diagnostics

Not supported

Sensor-supply short-circuit diagnostics

Not supported

Dedicated channel fault LEDs

No

Channel status LEDs

Green

Supply indication

Green PWR LED

Module indication

Green/red DIAG LED

Supply monitoring without wire-break reporting

The Basic module monitors supply voltage and provides green channel-state indicators. Wire-break and short-circuit diagnostic reporting are not supported. Unshielded wiring is limited to 200 m, rather than the 600 m listed for the selected P-reading modules.

Engineering system support

Engineering system support
Parameter / conditionSupported version / integration
STEP 7 TIA PortalV14; module manual lists HSP 0222
STEP 7 ClassicV5.5 SP3; module manual lists HSP 0229 V7.0
PROFINETGSDML V2.3
PROFIBUSSeparate GSD files, revisions 3 and 5 or later

Address space and functions

Input address space

1 byte

Firmware update

Not supported

Isochronous operation

Not supported

PROFINET R1 interface modules

Suitable for operation

Identification and maintenance data

I&M0 to I&M3

Safety functions

Not supported

Configure the exact module identity

Configure this exact ET 200SP module rather than a visually similar input module. Use the listed engineering-system support for the selected configuration path.

Module dimensions and operating conditions

Dimensions W × H × D

15 × 73 × 58 mm

Electronic module; excludes BaseUnit and packaging

Approximate module weight

28 g

Horizontal operating temperature

−30 to +60 °C

Operation below 0 °C requires hardware status FS02 or later

Vertical operating temperature

−30 to +50 °C

Operation below 0 °C requires hardware status FS02 or later

Maximum installation altitude

5000 m

Above 2000 m, additional installation restrictions apply as described in the ET 200SP system manual

Color code

CC02

Mechanical coding

Type B

Packing unit

1 module

What this order number includes

6ES7131-6BF61-0AA0 identifies the DI 8x24VDC SRC BA electronic module in a one-piece packing unit. Order the type A0 BaseUnit separately for the intended wiring arrangement. This is a standard digital I/O module, not a fail-safe I/O module, interface module or complete ET 200SP station.

Sourcing and order support

Order the exact product and condition your project requires, with assistance from quotation through delivery.

Exact product identification

Your quotation references the complete manufacturer part number to keep the requested product clear.

Condition options

Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.

International delivery

Shipping options are prepared around your destination, quantity and requested delivery date.

Documentation support

Access available manufacturer product data, manuals and certificates associated with the order number.