Skip to content
SICK IME connector inductive proximity sensor

SICK IME12-08NPSZC0K IME M12 Inductive Sensor

IME12-08NPSZC0K

M12 inductive proximity sensor, 8 mm nominal sensing range, non-flush installation and PNP normally-open output. M12 4-pin male connector; short-body, 10–30 V DC supply.

Availability
In Stock
Available quantity
12 units
Condition
New Original
SKU
IME12-08NPSZC0K
Lifecycle
Active
$38.00
Request a quote
Ask a product question

12 months warranty

Warranty coverage and terms are confirmed with your order.

Fast shipping

We coordinate the fastest available shipping option for your destination.

Secure payment

Available payment methods are handled through secure payment channels.

Worldwide delivery

Carrier and delivery options are confirmed for your destination before dispatch.

Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of SICK. Brand names are used for identification and compatibility purposes only. Read disclaimer

Technical specifications

Metal-target detection, electrical interface and mounting requirements for IME12-08NPSZC0K.

Ordered configuration

Type designation

IME12-08NPSZC0K

SICK part number

1040779

Thread

M12 × 1

Nominal sensing range Sn

8 mm

Installation

Non-flush

Output

PNP / NO

Circuit

DC 3-wire

Detect metal within the installed sensing geometry

This inductive sensor detects metal targets without a reflector or optical alignment. The 8 mm Sn value is the nominal sensing range, not a universal guaranteed clearance for every metal, target size or approach. Steel is the reference material; stainless steel, aluminum, copper and brass can reduce the usable distance.

Flush and non-flush are different installation choices

The sensing head projects beyond surrounding metal. Preserve the manufacturer’s metal-free space around the active face and the separation between neighboring sensors. Non-flush mounting provides greater nominal reach but cannot be installed as though the sensing head were shielded flush with a metal bracket.

Electrical ratings

Supply

10–30 V DC

Continuous output current

≤200 mA

No-load current

≤10 mA

Voltage drop

≤2 V at maximum output current

Startup availability delay

≤100 ms

Connection

Male connector M12, 4-pin

PNP normally-open switching

The PNP output sources positive voltage to the receiving input when a metal target is detected. Use a sinking input circuit with a common 0 V reference. NO describes the output’s normal target-absent state; it is not a potential-free relay contact.

Supply and signal assignment

Pin 1/brown is L+, pin 3/blue is 0 V (M), and pin 4/black is the normally-open switching signal. Pin 2 is unused for this 3-wire NO configuration; four connector positions do not mean four controlled outputs.

Installation details

Housing

Short-body

Housing length

46 mm

Body material

Nickel-plated brass

Ingress protection

IP67

Ambient operation

−25 to +75 °C

Mounting hardware

Two mounting nuts

Manufacturer dimensions and mounting legend

SICK IME product information, 2010-06-17, p.38. Connector and cable variants are distinguished in the original views.

Manufacturer dimensions and mounting legend

Manufacturer dimensions and mounting legend

SICK IME product information, 2010-06-17, p.38. Connector and cable variants are distinguished in the original views.

Manufacturer M12 NO connection diagram

SICK IME product information, p.38. Left-hand diagram applies to the selected M12 4-pin NO reference.

Manufacturer M12 NO connection diagram

Manufacturer M12 NO connection diagram

SICK IME product information, p.38. Left-hand diagram applies to the selected M12 4-pin NO reference.

Match the full type code for replacement

Keep IME12-08NPSZC0K and ordering number 1040779 together in replacement records. Match mounting geometry, PNP output, NO function, connection and body length. A short-body sensor does not automatically have a shorter sensing range, and a longer sensing range does not make flush and non-flush versions interchangeable.

Sourcing and order support

Order the exact product and condition your project requires, with assistance from quotation through delivery.

Exact product identification

Your quotation references the complete manufacturer part number to keep the requested product clear.

Condition options

Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.

International delivery

Shipping options are prepared around your destination, quantity and requested delivery date.

Documentation support

Access available manufacturer product data, manuals and certificates associated with the order number.