Exact product identification
Your quotation references the complete manufacturer part number to keep the requested product clear.

IME12-04BPSZC0S
M12 inductive proximity sensor, 4 mm nominal sensing range, flush installation and PNP normally-open output. M12 4-pin male connector; standard housing, 10–30 V DC supply.
Warranty coverage and terms are confirmed with your order.
We coordinate the fastest available shipping option for your destination.
Available payment methods are handled through secure payment channels.
Carrier and delivery options are confirmed for your destination before dispatch.
Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of SICK. Brand names are used for identification and compatibility purposes only. Read disclaimer
Metal-target detection, electrical interface and mounting requirements for IME12-04BPSZC0S.
IME12-04BPSZC0S
1040764
M12 × 1
4 mm
3.24 mm
Flush
2000 Hz
PNP / NO
DC 3-wire
This inductive sensor detects metal targets without a reflector or optical alignment. The 4 mm Sn value is the nominal sensing range, not a universal guaranteed clearance for every metal, target size or approach. Steel is the reference material; stainless steel, aluminum, copper and brass can reduce the usable distance.
The sensing face is designed for flush mounting in metal. Maintain the manufacturer’s target clearance and adjacent-sensor spacing; flush mounting does not eliminate interactions between closely spaced sensors.
10–30 V DC
≤200 mA
≤10 mA
≤2 V at maximum output current
≤100 ms
Male connector M12, 4-pin
The PNP output sources positive voltage to the receiving input when a metal target is detected. Use a sinking input circuit with a common 0 V reference. NO describes the output’s normal target-absent state; it is not a potential-free relay contact.
Pin 1/brown is L+, pin 3/blue is 0 V (M), and pin 4/black is the normally-open switching signal. Pin 2 is unused for this 3-wire NO configuration; four connector positions do not mean four controlled outputs.
Standard
65 mm
Nickel-plated brass
IP67
−25 to +75 °C
Two mounting nuts
Exact model data sheet: retain the lettered installation clearances, pin assignment and dimensional-view legend.
Keep IME12-04BPSZC0S and ordering number 1040764 together in replacement records. Match mounting geometry, PNP output, NO function, connection and body length. A short-body sensor does not automatically have a shorter sensing range, and a longer sensing range does not make flush and non-flush versions interchangeable.
Order the exact product and condition your project requires, with assistance from quotation through delivery.
Your quotation references the complete manufacturer part number to keep the requested product clear.
Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.
Shipping options are prepared around your destination, quantity and requested delivery date.
Access available manufacturer product data, manuals and certificates associated with the order number.