Exact product identification
Your quotation references the complete manufacturer part number to keep the requested product clear.

TM221ME16R
A narrow M221 Book Ethernet controller with eight digital inputs and eight relay outputs. Unlike the compact CE relay controllers, it uses 24 V DC power and places the I/O on removable screw terminal blocks.
Warranty coverage and terms are confirmed with your order.
We coordinate the fastest available shipping option for your destination.
Available payment methods are handled through secure payment channels.
Carrier and delivery options are confirmed for your destination before dispatch.
Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Schneider Electric. Brand names are used for identification and compatibility purposes only. Read disclaimer
I/O, relay load circuits, communication and installation details for TM221ME16R.
The Book relay base uses a narrow 70 mm-wide cabinet layout and an even eight-input/eight-output split. Choose it when rail space is limited and relay contacts are needed, while keeping the controller supply on 24 V DC.
TM221ME16R
Schneider Electric
Modicon M221
Book
16
Digital inputs plus digital outputs; analog inputs are additional
8
8
2 × 0–10 V DC
24 V DC
20.4–28.8 V DC operating range
Removable screw terminal blocks
Book and compact controllers are distinct layouts: this model has 8 digital inputs and 8 outputs. The selected Book model has screw terminals; G-suffix spring-terminal versions are different order numbers.
There are 8 digital inputs in total, not 8 regular inputs plus four more. Four of those channels—I0, I1, I6 and I7—can be assigned to high-speed counting at up to 100 kHz. The remaining 4 channels are regular digital inputs. Choose the configured counting mode and input filter for the actual signal.
24 V DC; IEC/EN 61131-2 Type 1; sink/source
19.2–28.8 V DC
I0, I1, I6, I7
Shielded; maximum 10 m
Unshielded; maximum 30 m
2 single-ended voltage inputs
0–10 V DC
10 bits
±1% of full scale
Not isolated from internal logic; negative poles connected internally
Dedicated supplied cables; 1 m
The two built-in analog channels accept 0–10 V voltage signals. Use an appropriate analog expansion module for current-loop measurement rather than treating the onboard connector as a native 4–20 mA input.
Relay contacts switch separately supplied AC or DC load circuits. The controller supply voltage is not the voltage delivered automatically at the output terminals. Protect each load branch and its common circuit; use a freewheeling diode for inductive DC loads or an RC snubber for inductive AC loads. Capacitive loads are not supported.
Normally open relay contacts
8
2 A
24 V DC or 240 V AC rated
7 A for Q0–Q3; 7 A for Q4–Q7
Not provided
Not built in
20 operations per minute
10 ms maximum on / off
Relay contact life depends on load type and switching power; the 2 A contact rating is not an inductive-load lifetime guarantee. The groups shown in the wiring diagram are separate commons.
TM221ME16R output wiring
M221 hardware guide EIO0000003313.04, page 200. Output commons, load-protection circuits and Type T fuse symbols.
1 × RJ45; Modbus TCP/IP; 10/100 Mbit/s
1 × RJ45; RS-232 / RS-485
USB 2.0 Mini-B
SD card slot
Physical switch and configurable input control
| Parameter / condition | Connection / equipment | Supported configuration |
|---|---|---|
| Local I/O | TM3 or TM2 expansion bus | Up to 7 expansion modules |
| Remote I/O | TM3 transmitter / receiver pair | Up to 7 additional TM3 modules |
| Distributed I/O | TM3 bus coupler over the appropriate network | Separate bus-coupler configuration |
The permitted configuration also depends on expansion-bus power consumption. TM3 transmitter/receiver modules do not count toward the seven expansion-I/O-module limit.
TM3 expansion attaches through the side expansion bus. The Book controller does not have the compact controller’s TMC2 cartridge slot. Expansion modules and communication accessories are separate order items.
Use EcoStruxure Machine Expert – Basic for M221 application programming, hardware configuration and diagnostics. It is the Basic edition for this controller range, not the separate Machine Expert environment used for M241/M251 projects. USB Mini-B provides a local programming connection; this Ethernet model also has a network interface.
512 kbytes
256 kbytes
256 kbytes
256 kbytes
Configured in Machine Expert – Basic
| Parameter / condition | Horizontal mounting | Vertical mounting |
|---|---|---|
| Ambient operating temperature | −10 to +55 °C | −10 to +35 °C |
| Expansion-module position | Beside the controller | Above the controller |
IP20 with protective covers fitted
DIN rail or panel
70 mm
−25 to +70 °C
10–95%; noncondensing
0–2000 m
Pollution degree 2; enclosed industrial cabinet
Install the controller in an enclosure and maintain the mounting clearances in the hardware guide. Route power wiring separately from analog, communication and fast-I/O cables; shield the latter and terminate their shields at the grounding arrangement. M221 is a standard logic controller, not a safety controller.
Manufacturer resources for controller selection, wiring and programming.
Order the exact product and condition your project requires, with assistance from quotation through delivery.
Your quotation references the complete manufacturer part number to keep the requested product clear.
Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.
Shipping options are prepared around your destination, quantity and requested delivery date.
Access available manufacturer product data, manuals and certificates associated with the order number.