Exact product identification
Your quotation references the complete manufacturer part number to keep the requested product clear.

XNX-UTAI-RNNNN
UL/CSA XNX IR transmitter, aluminum alloy, ¾-inch NPT entries, 18–32 V DC. External infrared detector selected separately. Fitted alarm/fault relay module; 4–20 mA with HART.
Warranty coverage and terms are confirmed with your order.
We coordinate the fastest available shipping option for your destination.
Available payment methods are handled through secure payment channels.
Carrier and delivery options are confirmed for your destination before dispatch.
Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Honeywell. Brand names are used for identification and compatibility purposes only. Read disclaimer
Configuration, sensor-system integration and installation data for XNX-UTAI-RNNNN.
XNX-UTAI-RNNNN is a complete configured Honeywell XNX transmitter order code: aluminum alloy housing, UL/CSA approval selection, ¾-inch NPT entries and IR detector / 4–20 mA input interface. The relay output option is installed.
XNX-UTAI-RNNNN
UL/CSA
¾-inch NPT
Aluminum alloy
IR
R — relay module fitted
N — not fitted
NNN — none specified
¾-inch NPT threads, UL/CSA approval selection and the IR input personality are part of this product’s identity. The aluminum housing is approximately 2.8 kg before separately selected sensing equipment. A different personality, entry thread or fitted option changes the ordered configuration.
XNX-UTAI-RNNNN uses the XNX IR personality to interface with Searchpoint Optima Plus point-infrared or Searchline Excel open-path detector equipment and documented generic 4–20 mA inputs. The detector is ordered separately: the NNN suffix does not include a sensing head or an open-path transmitter/receiver system.
IR — external detector interface
Searchpoint Optima Plus / Searchline Excel
Generic 4–20 mA input
No — sensor/range suffix NNN
Uses the different mV personality, not this IR configuration
9.7 W maximum
13.2 W maximum
Receiver assembly only; not the complete two-ended open-path power requirement.
A point detector and an open-path detector measure different gas quantities and use different measuring ranges. The XNX IR interface alone does not define a gas, ppm/%LEL scale, optical path length or response time. Select the detector and use its measurement definition at the receiving system.
The IR personality provides detector supply/signal connections and documented Optima/Excel communication terminals. These are separate from the XNX output to the plant controller; a detector communication connection does not mean a Modbus output module is fitted to this transmitter.
24 V DC
18–32 V DC
4–20 mA with HART
Selectable source, sink or isolated mode
±1% of full scale
Current output accuracy, not gas-sensor measurement accuracy.
0.5–2.5 mm²
Cage-style plug-in terminals with retaining screws.
Magnetic switches; multilingual backlit LCD
Alarm, power and fault LEDs
Account for the connected detector, cable resistance and controller input when choosing the supply and cable. Source/sink/isolated switches are on the rear of the POD; the wiring and current-loop load must match the selected arrangement.
R — relay module
Two changeover alarm relays
One changeover fault relay
Retained
Not fitted; mutually exclusive with the relay module
This R configuration adds two alarm relays and one fault relay. Their configured switching behavior is separate from the analog gas-reading signal; the relay module is not a gas sensor and does not change the IR personality or supply a detector.
HART communication is available over the standard 4–20 mA signal. The local-HART code is N, so this unit does not include the optional externally accessible HART connection port.
Aluminum alloy
Marine-grade coating
2.8 kg
Transmitter housing reference; not a packed shipping weight or a complete remote detector system.
Five ¾-inch NPT entries
Sensor or local-HART hardware occupies an entry when fitted.
Integral surface-mount lugs
Pipe or ceiling mounting with separately selected brackets
IP66 / NEMA 4X
−40 to +65 °C
The selected sensor/detector can impose a narrower operating range.
160 × 197 × 114 mm
Manufacturer transmitter-only reference; excludes separately selected detector/sensor assemblies.
A Searchpoint Optima Plus attachment and a remote Searchline Excel installation have different mechanical and cable arrangements. The transmitter body dimensions are not the installed dimensions of those complete detector systems.
Original transmitter construction
Manufacturer platform construction diagram. The EC barrier is a different personality’s component, not part of this IR input specification. The optional local HART interface shown is not fitted on this N-code model.
XNX-UTAI-RNNNN uses ¾-inch NPT entries under its UL/CSA ordering selection. Use the corresponding certified glands/conduit and stopping plugs. The five housing entries are not five unused cable ports once a sensor or local interface has been fitted.
Manufacturer technical resources for the XNX platform and its ordered input configuration.
Order the exact product and condition your project requires, with assistance from quotation through delivery.
Your quotation references the complete manufacturer part number to keep the requested product clear.
Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.
Shipping options are prepared around your destination, quantity and requested delivery date.
Access available manufacturer product data, manuals and certificates associated with the order number.