Exact product identification
Your quotation references the complete manufacturer part number to keep the requested product clear.

XNX-UTAE-NNNNN
UL/CSA XNX EC transmitter, aluminum alloy, ¾-inch NPT entries, 16–32 V DC. EC barrier/adapter; gas cartridge selected separately. 4–20 mA with HART.
Warranty coverage and terms are confirmed with your order.
We coordinate the fastest available shipping option for your destination.
Available payment methods are handled through secure payment channels.
Carrier and delivery options are confirmed for your destination before dispatch.
Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Honeywell. Brand names are used for identification and compatibility purposes only. Read disclaimer
Configuration, sensor-system integration and installation data for XNX-UTAE-NNNNN.
XNX-UTAE-NNNNN is a complete configured Honeywell XNX transmitter order code: aluminum alloy housing, UL/CSA approval selection, ¾-inch NPT entries and EC toxic/oxygen sensor interface. The standard 4–20 mA/HART configuration has no optional output module or local HART port.
XNX-UTAE-NNNNN
UL/CSA
¾-inch NPT
Aluminum alloy
EC
N — no optional output module
N — not fitted
NNN — none specified
¾-inch NPT threads, UL/CSA approval selection and the EC input personality are part of this product’s identity. The aluminum housing is approximately 2.8 kg before separately selected sensing equipment. A different personality, entry thread or fitted option changes the ordered configuration.
XNX-UTAE-NNNNN provides the XNX EC interface for toxic-gas and oxygen electrochemical sensors. It includes the EC interface’s intrinsically safe barrier and adapter, but its NNN sensor/range suffix does not specify a gas cartridge. Select the matching XNX EC sensing components for the target gas and measuring range.
EC — electrochemical
XNX toxic and oxygen electrochemical sensors
Intrinsically safe barrier and adapter
Not specified by this NNN order code
Not the sensor interface of this EC configuration
Oxygen, hydrogen sulfide, carbon monoxide and other supported electrochemical applications use distinct sensor cartridges and ranges. Changing a display setting does not convert an EC cartridge to a different gas. A transmitter-only EC configuration is not a complete calibrated gas detector.
The manufacturer specifies 6.2 W maximum for an XNX EC toxic-sensor assembly. Use the selected sensor and the installed cable length when sizing supply capacity and voltage drop; this reference does not establish one universal measuring range or sensor response time.
24 V DC
16–32 V DC
4–20 mA with HART
Selectable source, sink or isolated mode
±1% of full scale
Current output accuracy, not gas-sensor measurement accuracy.
0.5–2.5 mm²
Cage-style plug-in terminals with retaining screws.
Magnetic switches; multilingual backlit LCD
Alarm, power and fault LEDs
Account for the connected detector, cable resistance and controller input when choosing the supply and cable. Source/sink/isolated switches are on the rear of the POD; the wiring and current-loop load must match the selected arrangement.
The N option code supplies standard 4–20 mA with HART, without relay, Modbus RTU or FOUNDATION Fieldbus output hardware. Those are other module configurations, not simultaneously available outputs of this exact order code.
HART communication is available over the standard 4–20 mA signal. The local-HART code is N, so this unit does not include the optional externally accessible HART connection port.
Aluminum alloy
Marine-grade coating
2.8 kg
Transmitter housing reference; not a packed shipping weight or a complete remote detector system.
Five ¾-inch NPT entries
Sensor or local-HART hardware occupies an entry when fitted.
Integral surface-mount lugs
Pipe or ceiling mounting with separately selected brackets
IP66 / NEMA 4X
−40 to +65 °C
The selected sensor/detector can impose a narrower operating range.
160 × 197 × 114 mm
Manufacturer transmitter-only reference; excludes separately selected detector/sensor assemblies.
The selected EC sensor adapter, sensing element and any weather protection add to the installed envelope. Use the assembly dimensions for the chosen sensor arrangement rather than treating the transmitter body as the complete detector.
Original transmitter construction
Manufacturer platform construction diagram. This EC configuration includes the EC sensor-interface barrier and adapter. The optional local HART interface shown is not fitted on this N-code model.
XNX-UTAE-NNNNN uses ¾-inch NPT entries under its UL/CSA ordering selection. Use the corresponding certified glands/conduit and stopping plugs. The five housing entries are not five unused cable ports once a sensor or local interface has been fitted.
Manufacturer technical resources for the XNX platform and its ordered input configuration.
Order the exact product and condition your project requires, with assistance from quotation through delivery.
Your quotation references the complete manufacturer part number to keep the requested product clear.
Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.
Shipping options are prepared around your destination, quantity and requested delivery date.
Access available manufacturer product data, manuals and certificates associated with the order number.