Exact product identification
Your quotation references the complete manufacturer part number to keep the requested product clear.

XNX Universal Transmitter
Configurable fixed-gas transmitter for Honeywell EC, mV and IR detector interfaces. Standard 4–20 mA with HART, a local LCD and magnetic controls support industrial gas monitoring; housing, sensor personality and optional outputs define the configured unit.
Warranty coverage and terms are confirmed with your order.
We coordinate the fastest available shipping option for your destination.
Available payment methods are handled through secure payment channels.
Carrier and delivery options are confirmed for your destination before dispatch.
Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of Honeywell. Brand names are used for identification and compatibility purposes only. Read disclaimer
Choose the sensor interface and fitted options first, then size the power and mounting arrangement for the complete assembly.
XNX brings local display, signal output and configuration controls to a range of fixed gas sensors. It is a configurable transmitter platform, not a standalone relay or a detector that measures every gas at once. The fitted sensor and personality board establish the gas-detection function.
Honeywell
XNX Universal Transmitter
Configurable transmitter for fixed gas detection
EC, mV or IR personality board
4–20 mA with HART
Backlit multilingual LCD, status LEDs and magnetic switches
| Parameter / condition | Personality | Sensor / detector examples | Selection consequence |
|---|---|---|---|
| Electrochemical | EC | XNX toxic and oxygen electrochemical sensors | The gas cartridge sets the target gas and measuring range. |
| Millivolt | mV | MPD catalytic or infrared cartridges; documented Sensepoint and Model 705 types | An MPD infrared cartridge belongs to the mV personality, not the IR detector interface. |
| Infrared detector interface | IR | Searchpoint Optima Plus; Searchline Excel; documented generic 4–20 mA input | Used with the external detector interface rather than an XNX EC cartridge. |
Toxic gas concentration, oxygen volume, flammable-gas %LEL and open-path measurement are different sensing applications. Select a sensor and range for the gas hazard; the transmitter housing alone does not define a gas range, response time or measurement accuracy.
24 V DC
16–32 V DC
Required at the transmitter terminals.
18–32 V DC
Required at the transmitter terminals.
4–20 mA with HART
Source, sink or isolated arrangement selected at the POD switches.
| Parameter / condition | Assembly | Maximum power |
|---|---|---|
| EC toxic sensor | XNX EC (toxic) | 6.2 W |
| MPD sensor | XNX mV with catalytic or IR cell | 6.5 W |
| Point infrared detector | XNX IR with Searchpoint Optima Plus | 9.7 W |
| Open-path receiver | XNX IR with Searchline Excel receiver | 13.2 W |
Detector load and cable voltage drop determine the supply and cable selection. The Searchline Excel receiver value above is not a power budget for both ends of the open-path system. Terminal voltage limits apply after the voltage drop along the installed cable.
4–20 mA and HART
Two alarm relays and one fault relay
Isolated RS-485, Modbus RTU
FOUNDATION Fieldbus H1
Relay, Modbus and FOUNDATION Fieldbus options are mutually exclusive
Optional externally accessible connection
HART over the standard 4–20 mA loop does not mean the local port is fitted.
An IR personality’s detector-side interface and an optional Modbus output to the site controller serve different connections. Choose the control-system output independently of the sensor personality; a generic XNX name does not establish that a relay or bus option is installed.
Marine-finish aluminum alloy or 316 stainless steel
2.8 kg aluminum / 5 kg stainless steel
Sensor and accessory assemblies add their own dimensions and weight.
Five cable/conduit/sensor entries
M25 or ¾-inch NPT
The approval/entry combination is selected in the complete order code.
Integral surface-mount lugs; optional pipe or ceiling brackets
IP66 / NEMA 4X
−40 to +65 °C
The selected sensor may have a narrower temperature range.
Manufacturer outline drawings for local sensor assemblies
Original XNX data-sheet page 5, with MPD, EC toxic/oxygen and Sensepoint PPM assemblies. Dimensions are in millimetres; aluminum outlines are shown. Stainless steel body dimensions differ slightly but mounting-hole locations are unchanged.
The integral mounting pitch is shown separately from the sensor assembly envelope. An MPD assembly and an EC assembly have different overall heights, while a remotely mounted detector uses a different cable and mounting arrangement. Leave room to access the cover, cable entries and sensing element.
Select the approval, thread system and suitable glands or conduit as one installation configuration. IP66 is an ingress rating; it does not replace the hazardous-area approval or the gas sensor’s environmental limits.
A complete XNX order code specifies approval, entry thread, material, personality, output option, local HART port and sensor content. For a replacement, the full code and installed sensor identity distinguish a compatible configuration from a similar-looking housing.
ATEX/IEC
M25
316 stainless steel
mV sensor interface
No optional output module
No local HART port
MPD catalytic sensor, 0–100% LEL
4–20 mA with HART
XNX-AMSV-NNCB1 is the manufacturer’s example of a complete configured transmitter. An EC, IR, aluminum, relay-equipped or transmitter-only configuration uses a different order code. The example does not define the contents of every XNX shipment.
The standard transmitter supply includes integral mounting lugs, a magnetic wand/screwdriver, an Allen key and three blanking plugs. MPD or XNX EC sensors and cartridges are fitted when ordered; other detector equipment is supplied separately. Pipe and ceiling brackets, remote sensor kits and output-module options are separate selections.
Magnetic switches operate the local display menus. Sensor zero/span calibration and functional testing use the selected sensor’s gas and range; changing a transmitter setting does not substitute for installing the correct sensing element.
Manufacturer references for selection, installation and operation.
Order the exact product and condition your project requires, with assistance from quotation through delivery.
Your quotation references the complete manufacturer part number to keep the requested product clear.
Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.
Shipping options are prepared around your destination, quantity and requested delivery date.
Access available manufacturer product data, manuals and certificates associated with the order number.
Send the full order code or an existing nameplate for replacement sourcing. For a new installation, include the target gas and range, required output, housing/approval, quantity and destination.
Request an XNX quote