Exact product identification
Your quotation references the complete manufacturer part number to keep the requested product clear.

A06B-6250-H030
Standard αiPS 30HV-B regenerative power supply for FANUC αi-B drive systems. 30 kW continuous output, three-phase 380–480 V AC main input and separate 24 V DC control supply.
Warranty coverage and terms are confirmed with your order.
We coordinate the fastest available shipping option for your destination.
Available payment methods are handled through secure payment channels.
Carrier and delivery options are confirmed for your destination before dispatch.
Independent supplier: Xindustra is not an authorized distributor, reseller, or representative of FANUC. Brand names are used for identification and compatibility purposes only. Read disclaimer
Power ratings and system integration for A06B-6250-H030.
The A06B-6250-H030 supplies the common DC link for the connected αi-B servo and spindle amplifier modules. Its 30 kW continuous rating describes the power supply, rather than a motor-axis output rating. Regenerative control returns energy to the power source.
αiPS 30HV-B
A06B-6250-H030
30 kW
37 kW
96 kW
44 kVA at continuous rated output
380–480 V AC, +10% / −10%, three-phase, 47–63 Hz
24 V DC ±10%
0.8 A
Select the power supply using the combined servo and spindle duty, acceleration demand and regenerative loading. Continuous, 30-minute and peak figures describe different operating conditions; the peak value is not a continuous power rating. Main power equipment capacity assumes operation at continuous rated output.
B-65412EN/02 p.25. Use the αiPS 30-B column in the 400 V input table.
The three-phase main circuit provides drive power; the external 24 V DC circuit supplies control electronics. Include the current of every connected module in the 24 V supply budget. The manufacturer permits up to 15 SV/SP modules per power supply, subject to capacity selection and wiring requirements.
Install the applicable AC reactor and size the input breaker, magnetic contactor and wiring for the selected module and machine supply. Use a transformer when the main supply is outside the stated range. Input protection and reactors are separate system components.
This order is the standard A06B-6250 version. The manufacturer lists PFB-24 control-power backup support, but PFB-R and PFB-C Model B modules require the Level-up A06B-6252 version. Connecting PFB-R or PFB-C to the standard 6250 version causes the stated hardware-malfunction alarm; those versions are not interchangeable by power rating alone.
Provided
Provided
4
Install the module vertically and arrange the drive modules horizontally. Reserve the model-specific panel cut-out and maintenance area, separate power and signal wiring, and prevent dust or cutting fluid entering the cooling path. Keep exhaust flow unobstructed.
B-65412EN/02 p.136. The row for αiPS 30-B identifies the applicable outline, panel cut-out and maintenance area.
B-65412EN/02 p.21. The αiPS 11HV-B to125HV-B curve applies to this module; the lower part of this page contains other family curves.
Ambient temperature affects the available operating time at short-term rating for both the power supply and AC reactor. Use the manufacturer’s temperature curve when the machine cycle depends on the 30-minute rating, rather than treating it as available at every cabinet temperature.
Order the exact product and condition your project requires, with assistance from quotation through delivery.
Your quotation references the complete manufacturer part number to keep the requested product clear.
Tell us whether you need new original, new surplus, used, refurbished or repaired equipment.
Shipping options are prepared around your destination, quantity and requested delivery date.
Access available manufacturer product data, manuals and certificates associated with the order number.